FHD1007FS40P
| 1.Technical Parameter Measuring condition 1.Part shall be measured under a condition (Temperature: 5～35℃, Humidity: 45%～85%R.H., Atmospheric pressure: 860 ～1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ～1060hPa) is regulated to measure. |
|
|||
|
1 |
Resonant Frequency | 40.0±1.0KHz | ||
|
2 |
Ringing（measuerd with rubber holder as per figure on next page） | 1.5ms max. | ||
|
3 |
Echo(testing distance of 1000mm) | 70mv min. | ||
|
4 |
Bandwidt（-6dB） F.O.M. Transmitting sound Pressure Level | 1.2KHz | ||
|
5 |
Nominal Impedance（Ohm） | 1000 max. | ||
|
6 |
Capacitance at 1KHz ±25% | 2200pf | ||
|
7 |
Max.Driving Voltage（pulse width 0.5ms interval 50ms） | 50VP-P | ||
|
8 |
Total Beam Angle -6dB | 80°±12° | ||
|
9 |
Operation Temperature | -30to80℃ | ||
|
10 |
Storage Temperature | -40to85℃ | ||
|
2.Dimensions Unit：mm Case(Aluminium)
|
||||
| 3.Electrical And Acoustical Measuring Condition | ||||
| Recommended Setting
|
||||
|
wave form
|
||||
| Directional testing
|
||||
|
Beam Angle:Tested at 40.0Khz frequency
|
||||
|
2、Reliability Test After any following tests the part shall meet specifications without any degradation in appearance and performance except echo and ringing.Echo variation not exceeding 30%, residual vibration≤2.4ms.1、impact test At an acceleration of 980m/s²(100G), impact three times on each side.2、Drop Test Standard Packaging From 100±1cm(Drop on hard wood or board of 5cm thick, 10times.3、Vibration The product can withstand frequencies ranging from 10 to 55Hz, amplitude of 1.5mm, and scanning speed rate: loct/min vibration test, X, Y, Z three directions, 3 hours in each direction.4、high temperature storage The product is stored at +80 ± 3 ℃ for 1000 hours, and then stored in a strip at room temperature. Place under the piece for 24 hours.5、low temperature storage The product is stored at -40 ± 3 ℃ for 1000 hours, and then stored in a strip at room temperature. Place under the piece for 24 hours. f) High temperature and high humidity storage The product operates at a temperature of+80 ± 3 ℃ and a humidity of 85% R.H Storage for 1000h, then place at room temperature for 24 hours. g)Thermal Shock The probe is connected in parallel with a 3.9K Ω resistor at both ends, and is kept at -40 ℃± 3 ℃ for 0.5 hours. It is then heated to+80 ℃± 3 ℃ within 5 minutes and kept for 0.5 hours. After 1000 cycles, it is left at room temperature for 24 hours. |
||||
3.Packing
Keywords: FHD1007FS40P
上一個：
: 下一個
上一個：
下一個：
詢價
歡迎給我們留言，我們會盡快與您聯系！
消息
*注意：請確保您填寫的信息準確無誤，并保持溝通暢通，我們會盡快與您聯系
電話：+86-519-83822009
電話：+86-13813568186
傳真：+86-519-88739926
地址：江蘇省常州市天寧區鄭陸鎮
COOKIES
我們的網站使用 cookie 和類似技術來個性化向您展示的廣告，并幫助您在我們的網站上獲得最佳體驗。 欲了解更多信息，請參閱我們的隱私和 Cookie 政策
COOKIES
我們的網站使用 cookie 和類似技術來個性化向您展示的廣告，并幫助您在我們的網站上獲得最佳體驗。 欲了解更多信息，請參閱我們的隱私和 Cookie 政策
這些 cookie 是支付等基本功能所必需的。 標準 cookie 無法關閉，也不會存儲您的任何信息。
這些 cookie 收集信息，例如有多少人正在使用我們的網站或哪些頁面受歡迎，以幫助我們改善客戶體驗。 關閉這些 cookie 將意味著我們無法收集信息來改善體驗。
這些 cookie 使網站能夠提供增強的功能和個性化。 它們可能由我們或我們已將其服務添加到我們頁面的第三方提供商設置。 如果您不允許這些 cookie，那么部分或全部這些服務可能無法正常運行。
這些 cookie 幫助我們了解您感興趣的內容，以便我們可以在其他網站上向您展示相關廣告。 關閉這些 cookie 將意味著我們無法向您展示任何個性化廣告。